Multimeter with USB connection to PC

63,00 €
Only 1 in stock
SKU: 43114-MFAT
Multimeter with USB connection to PC
 Back to: Tester

Multimeter with USB connection to PC

Digital multimeter with PC interface for acquiring and recording measured values. This device complies with the IEC 61010-1:2001, CAT III 1000 V and CAT IV 600V standard overvoltage standards.
  • Display: 4 digits, 6000 resolution
  • USB port for PC connection (Windows software)
  • True RMS measurement
  • Relative measurement
  • Auto power-off
  • Data hold
  • LED backlight
  • Automatic / manual range selection
  • Low battery level indication
  • Diode and continuity measurement
  • Direct voltage (DC): 600mV / ± 0.5%, 6V/60V/600V / ± 0.8%, 1000V / ± 1.0%
  • Alternating voltage (AC): 600mV/6V/60V/600V / ± 1.0%, 1000V / ± 1.5%
  • Direct current (DC): 600µA/6000µA/60mA/600mA/6A/10A / ± 1.5%
  • Alternating current (AC): 600µA/6000µA/60mA/600mA / ± 1.8%, 6A/10A / ± 3.0%
  • Resistance: 600Ohm/6KOhm/60KOhm/600KOhm/6MOhm / ± 0.5%, 60MOhm / ± 1.5%
  • Capacitance: 60nF / ± 3.0%, 600nF/6µF/60µF/300µF / ± 5.0%
  • Logic frequency: 1Hz ~ 1 MHz ± (0.1% +3)
  • Frequency: 6Hz ~ 10kHz ± (0.05% +8)
  • Duty cycle: 1% ~ 99%
  • Temperature: -55 °C ~ 0 °C / ± 5.0%, 1 °C ~ 1000 °C ± 2.0%
  • Power supply: 1x 9V (included)
  • Dimensions: 190x90x40mm, Weight: approx. 500g
  • Package contents: test leads, USB connection cable with connector, temperature sensor, software CD